Publication
Number |
STANDARD PRACTICE
TITLE |
Price
$ U.S. |
SP-6-2007 |
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings |
$73.00 |
SP-9-2008 |
Spot Facing for Bronze, Iron and Steel Flanges |
$73.00 |
|
SP-25-2008 |
Standard Marking System for Valves, Fittings, Flanges, and Unions |
$116.00 |
|
SP-42-2009 |
Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends (Classes 150, 300 & 600) |
$104.00 |
|
SP-43-2008 |
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications (Note: a 2010 Errata Sheet has been issued and inserted into this standard) |
$109.00 |
|
SP-44-2010 |
Steel Pipeline Flanges |
$220.00 |
|
SP-45-2003
(R 2008) |
Bypass and Drain Connections |
$73.00 |
|
SP-51-2007 |
Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings |
$73.00 |
|
SP-53-1999
(R 2007) |
Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components - Magnetic Particle Examination Method |
$104.00 |
|
SP-54-1999
(R 2007) |
Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components - Radiographic Examination Method |
$104.00 |
|
SP-55-2006 |
Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Visual Method for Evaluation of Surface Irregularities |
$104.00 |
|
SP-58-2009 |
Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation |
$295.00 |
|
SP-60-2004 |
Connecting Flange Joint Between Tapping Sleeves and Tapping Valves |
$73.00 |
|
SP-61-2009 |
Pressure Testing of Valves |
$92.00 |
|
SP-65-2008 |
High Pressure Chemical Industry Flanges and Threaded Stubs for Use with Lens Gaskets |
$73.00 |
|
SP-67-2002a |
Butterfly Valves |
$104.00 |
|
SP-68-1997
(R 2004) |
High Pressure Butterfly Valves with Offset Design |
$104.00 |
|
SP-69-2003 |
Pipe Hangers and Supports - Selection and Application (ANSI-approved American National Standard) |
$218.00 |
|
SP-70-2006 |
Gray Iron Gate Valves Flanged and Threaded Ends |
$92.00 |
|
SP-71-2005 |
Gray Iron Swing Check Valves, Flanged and Threaded Ends |
$92.00 |
|
SP-72-2010 |
Ball Valves with Flanged or Butt-Welding Ends for General Service |
$92.00 |
|
SP-75-2008 |
Specification for High-Test, Wrought, Butt Welding Fittings |
$128.00 |
|
SP-78-2005a |
Gray Iron Plug Valves Flanged and Threaded Ends |
$92.00 |
|
SP-79-2009 |
Socket Welding Reducer Inserts |
$73.00 |
|
SP-80-2008 |
Bronze Gate, Globe, Angle, and Check Valves |
$104.00 |
|
SP-81-2006a |
Stainless Steel, Bonnetless, Flanged Knife Gate Valves |
$92.00 |
|
SP-83-2006 |
Class 3000 Steel Pipe Unions Socket Welding and Threaded |
$116.00 |
|
SP-85-2002 |
Gray Iron Globe & Angle Valves Flanged and Threaded Ends |
$92.00 |
|
SP-86-2009 |
Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators |
$116.00 |
|
SP-88-2010 |
Diaphragm Valves |
$116.00 |
|
SP-91-2009 |
Guidelines for Manual Operation of Valves |
$73.00 |
|
SP-92-1999 |
MSS Valve User Guide |
$85.00 |
|
SP-93-2008 |
Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Liquid Penetrant Examination Method |
$104.00 |
|
SP-94-2008 |
Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Ultrasonic Examination Method |
$104.00 |
|
SP-95-2006 |
Swage(d) Nipples and Bull Plugs |
$116.00 |
|
SP-96-2001
(R 2005) |
Guidelines on Terminology for Valves and Fittings |
$128.00 |
|
SP-97-2006 |
Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded, and Buttwelding Ends |
$92.00 |
|
SP-98-2001
(R 2005) |
Protective Coatings for the Interior of Valves, Hydrants, and Fittings |
$73.00 |
|
SP-99-1994
(R 2005) |
Instrument Valves |
$73.00 |
|
SP-100-2009 |
Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Type Valves |
$116.00 |
|
SP-101-1989
(R 2001) |
Part-Turn Valve Actuator Attachment - Flange and Driving Component Dimensions and Performance Characteristics |
$73.00 |
|
SP-102-1989
(R 2001) |
Multi-Turn Valve Actuator Attachment - Flange and Driving Component Dimensions and Performance Characteristics |
$73.00 |
|
SP-104-2003 |
Wrought Copper Solder Joint Pressure Fittings |
$73.00 |
|
SP-105-1996
(R 2005) |
Instrument Valves for Code Applications |
$73.00 |
|
SP-106-2003 |
Cast Copper Alloy Flanges and Flanged Fittings Class 125, 150 and 300 |
$80.00 |
|
SP-108-2002 |
Resilient-Seated Cast-Iron Eccentric Plug Valves |
$92.00 |
|
SP-109-1997
(R 2006) |
Welded Fabricated Copper Solder Joint Pressure Fittings |
$73.00 |
|
SP-110-2010 |
Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends |
$92.00 |
|
SP-111-2001
(R 2005) |
Gray-Iron and Ductile-Iron Tapping Sleeves |
$73.00 |
|
SP-112-1999
(R 2004) |
Quality Standard for Evaluation of Cast Surface Finishes -Visual and Tactile Method. This SP must be used with a 10-surface, three dimensional Cast Surface Comparator, which is a necessary part of the Standard. Price for both is $170.00. The Standard or Comparators may be sold separately at $85.00 each. Same quantity discounts apply on total order. |
$170.00 |
|
SP-113-2001
(R 2007) |
Connecting Joint between Tapping Machines and Tapping Valves |
$73.00 |
|
SP-114-2007 |
Corrosion Resistant Pipe Fittings Threaded and Socket Welding Class 150 and 1000 |
$104.00 |
|
SP-115-2006 |
Excess Flow Valves, 1 1/4 NPS and Smaller, for Natural Gas Service |
$73.00 |
|
SP-116-2003 |
Service-Line Valves and Fittings for Drinking Water Systems |
$104.00 |
|
SP-117-2006 |
Bellows Seals for Globe and Gate Valves |
$92.00 |
|
SP-118-2007 |
Compact Steel Globe & Check Valves - Flanged, Flangeless, Threaded & Welding Ends (Chemical & Petroleum Refinery Service) |
$104.00 |
|
SP-119-2003 |
Factory-Made Wrought Belled End Socket-Welding Fittings |
$92.00 |
|
SP-120-2006 |
Flexible Graphite Packing System for Rising Stem Steel Valves - Design Requirements |
$104.00 |
|
SP-121-2006 |
Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves |
$109.00 |
|
SP-122-2005 |
Plastic Industrial Ball Valves |
$73.00 |
|
SP-123-1998
(R 2006) |
Non-Ferrous Threaded and Solder-Joint Unions for Use With Copper Water Tube |
$73.00 |
|
SP-124-2001 |
Fabricated Tapping Sleeves |
$73.00 |
|
SP-125-2010 |
Gray Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves |
$92.00 |
|
SP-126-2007 |
Steel In-Line Spring-Assisted Center Guided Check Valves |
$104.00 |
|
SP-127-2001 |
Bracing for Piping Systems Seismic-Wind-Dynamic Design, Selection, Application |
$134.00 |
|
SP-128-2006 |
Ductile Iron Gate Valves |
$138.00 |
|
SP-129-2003
(R 2007) |
Copper-Nickel Socket-Welding Fittings and Unions |
$92.00 |
|
SP-130-2003 |
Bellows Seals for Instrument Valves |
$97.00 |
|
SP-131-2004 |
Metallic Manually Operated Gas Distribution Valves |
$97.00 |
|
SP-132-2010 |
Compression Packing Systems for Instrument Valves |
$73.00 |
|
SP-133-2005 |
Excess Flow Valves for Low Pressure Fuel Gas Appliances |
$83.00 |
|
SP-134-2006a |
Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions |
$138.00 |
|
SP-135-2006 |
High Pressure Steel Knife Gate Valves |
$110.00 |
|
SP-136-2007 |
Ductile Iron Swing Check Valves |
$125.00 |
|
SP-137-2007 |
Quality Standard for Positive Material Identification of Metal Valves, Flanges, Fittings, and Other Piping Components |
$100.00 |
|
SP-138-2009 |
Quality Standard Practice for Oxygen Cleaning of Valves & Fittings |
$100.00 |
|
SP-139-2010 |
Copper Alloy Gate, Globe, Angle, and Check Valves for Low Pressure/Low Temperature Plumbing Applications |
$104.00 |
|
Complete
Set |
(ONE
FULL SET $7,814.00
LESS 20% $1,562.80
= $6,251.20) |
$6,251.20 |
